FENGCHI has completed the on-site installation and commissioning of an HD-2800 Folder Gluer and Stitcher Machine at a corrugated carton plant in Vietnam. After trial runs on real production orders, the line was handed over to the customer and is now in normal production — folding, gluing, stitching, counting and stacking corrugated cartons in a single pass.

From Installation to Stable Production
A 17 m long, 9.7 t finishing line is never just a drop-off. FENGCHI engineers worked on site alongside the plant’s own team to bring the HD-2800 folder gluer & stitcher into production and run the first orders through the complete folding, gluing, stitching, counting and stacking sequence.
Why the HD-2800 Fits This Plant
For a box plant handling mixed orders, the HD-2800 replaces two separate finishing steps with one line. Depending on the job, it can fold and glue, stitch, or combine folding, gluing and stitching in a single pass, with one-key conversion between the gluing and stitching functions. Single and double stitching are easily switched, stitch quantity is adjustable from 1–99, and stitch gap can be set between 40–500 mm.
Job changes take around 3–5 minutes thanks to the order memorising function — a practical advantage where short runs and frequent SKU changes are the norm. Full computer control covers automatic feeding, folding, correcting, stitching, gluing, counting and stacking. A paper correction device makes a secondary compensation to eliminate misalignment before stitching, while automatic stitch feeding provides stitch detection and stitch-break handling. The swinging stitching head keeps power consumption low and seam quality stable at speed.
- One pass, three operations: fewer handling steps, less work-in-progress between machines and lower labour per box.
- Both joint types on demand: stitched seams for heavier and export-grade cartons, glued boxes for lighter retail packaging, without a second finishing line.
- Fast changeover: 3–5 minute job changes with stored order settings support high-mix, short-run production.
- Wide board range: A, B, C and AB flute in 3-ply, 5-ply and 7-ply corrugated board, up to 2,800 × 1,200 mm sheets.
What This Delivery Means for Vietnamese Box Makers
Vietnam’s corrugated packaging sector continues to expand on the back of e-commerce, export manufacturing and domestic consumption. For local carton plants, that translates into more SKUs, shorter runs and tighter delivery windows — and growing pressure on the finishing end of the line, where folding, gluing and stitching have traditionally been split across separate machines and crews.
A stitched seam remains the preferred joint for heavy-duty and export-grade cartons, while glued boxes dominate lighter retail packaging. Running both on one computer-controlled line lets a plant accept both order types without a second machine, extra operators or extra floor space. Deliveries like this one also show what matters beyond the specification sheet: getting a 17 m line installed, commissioned and into stable production inside a working factory, with the customer’s own operators running it.
Site Video: The HD-2800 Running in Vietnam
Commissioning and Support, On Site
FENGCHI engineers were present for the installation and commissioning of this HD-2800, working with the plant’s operators through trial production and handover. For HD Series projects, FENGCHI supports layout planning, installation, commissioning, operator guidance, spare parts and remote technical assistance. Share your board grades, box styles, available floor space and target output, and our team will recommend the right configuration for your plant.
Frequently Asked Questions
What does the HD-2800 folder gluer and stitcher do?
It folds, glues, stitches, counts and stacks corrugated cartons in one automated line. It can run folding and gluing only, stitching only, or both operations together in a single pass, with one-key conversion between gluing and stitching.
Can the HD-2800 switch between glued and stitched boxes?
Yes. One-key conversion switches between gluing and stitching, and single or double stitching can be selected. Stitch quantity is adjustable from 1–99 with a 40–500 mm stitch gap.
What board sizes and flutes can it handle?
Sheets from 760 × 300 mm up to 2,800 × 1,200 mm, in A, B, C and AB flute and in 3-ply, 5-ply and 7-ply corrugated board.
How long does a job changeover take?
Typically 3–5 minutes, supported by the order memorising function that stores settings for repeat orders — well suited to short runs and frequent SKU changes.
Does FENGCHI install and commission machines in Vietnam?
Yes. This HD-2800 delivery included on-site installation, commissioning and trial production with the customer’s operators. Contact FENGCHI to discuss installation planning and operator handover for your plant.





